Additional Resources

 

 

How do you really feel about What Would Cause My Electric Water Heater to Stop Working??

Numerous modern residences use an electric hot water heater for their heating unit, due to its comfort and convenience of use. Nevertheless, just like any other electric appliances, troubles may arise with its use, unexpectedly. It can be actually aggravating to wake up to a chilly shower instead of a warm one or having your bath with water that isn't warm sufficient or perhaps too warm. Whatever the case might be, water heater troubles can be rather aggravating. Fortunately, we've made a checklist of possible solutions to your water heater concerns. There are a number of variables that might create a number of these issues, it could be a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for security. Whatever the trouble is, getting it repaired need to not pose excessive of an issue if you comply with these actions:

 

Check Your Power Supply:

As fundamental as this might seem, it is extremely essential. Without adequate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it on and off again. Replace any kind of broken or worn-out fuse. Evaluate the home appliance with power after these adjustments to see if it's currently working.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power problem, then try taking a look at your burner if it is still working. Evaluate each of your burner to be sure the issue isn't with any one of them. If any one of them is faulty, replace that part and after that inspect whether the hot water is back on.

 

Inspect Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot sufficient, you may require to inspect the temperature setups on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open the access panel and press the red button for temperature reset above the thermostat. This ought to assist heat up the water. Transform the breaker back on and also examine if the trouble has actually been dealt with.

 

Call A Professional:

If after replacing all defective parts as well as resetting your temperature, the water heater still isn't working, you may need to get in touch with a professional plumber for an expert viewpoint. The issue with your heating unit could be that the hot and cold taps have been switched or it may be undersized for the amount of hot water required in your house. Whatever the situation might be, a specialist plumber would certainly aid fix the issue.

 

Final thought

Water heater problems are not always major. Many of them result from small problems like a blown fuse or worn-out heating element. Replacing the faulty components must work. Nevertheless, if you are still unable to solve the trouble, give a call to your local plumber ahead to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I hope you liked our excerpt on How to Troubleshoot and Repair an Electric Water Heater. Many thanks for taking time to read our short article. Are you aware of somebody who is in the market for the topic? Take a moment to promote it. Thank you for your time. Visit us again soon.

Get A Quote